L50 Fresh Water Filter Maintenance Guide

This article will guide you through the steps of maintenance for the Fresh Water Filter on L50.

1. First step is to close the Water Valve by turning the valve to close. This will stop the flow of fresh water to the Water Filter. Now remove the Water Filter Cap, there will be a small amount of water residue, remove the Silver Mesh.

2. Rinse the Water Filter and Cap under a tap to remove all debris, this will ensure that any water passing through is kept clean moving forward.

3. Simply reattach the Water Filter by screwing it back into place until it is sealed tight. And then re-open the Water Valve by turning it in the opposite direction.

If you have any questions or need further assistance, please feel free to reach out, we are here to help! - Contact Us