SP50 - Roller Brush Overload Error

The SP50 Roller Brush Overload Error usually occurs when hair, string, fibres or other debris become tangled around the roller brush. This prevents the brush from rotating freely.

How to resolve the error

1. Stop the robot and switch off the power.
2. Remove the roller brush.
3. Carefully remove any hair, string, fibres or debris wrapped around the brush and both ends of the roller.
4. Check that the roller brush is not damaged and can rotate freely.
5. Reinstall the roller brush securely.
6. Restart the robot and check whether the error has cleared.

Video guide

Watch the video below for guidance on removing, checking and cleaning the SP50 roller brush.

Note: If the error continues after cleaning and reinstalling the roller brush, the brush may be worn and require replacement, as it is a consumable part.