How to replace Bella Bot's Function keys with switch press keypad?

This Article will show you how to replace the function keys with switch press keypad on BellaBot.

Overview:
The BellaBot comes equipped with a set of function keys for various operations. In some cases, users may prefer to replace these function keys with a switch press keypad to enhance usability or customise operations. Here’s a step-by-step guide to help you make this replacement.

Step 1:
Start by unscrewing the 10 screws around BellaBot's back panel (keep the screws safe for reassembly). Then, use a plastic card or similar tool to gently wedge between the robot's panel and shell to loosen and remove it.

Step 2:
Once the back panel is off, you'll see 4 screws and 2 connectors holding the part in place. Carefully remove these, as this is the part you're replacing. Be gentle to avoid any damage.

Step 3:
After removing the old part, take the new part and connect it to the connectors, ensuring they’re aligned correctly, as it won’t work if connected the wrong way. You may need an extra hand to help line up the unit and screw it back into place.

Step 4:
Once the new unit is securely fastened, reattach the back panel by screwing it in. Then, power BellaBot back on and check to see if everything is working correctly.

If you still need more help then contact us at support@sparkepos.com